Resin Cleaner | 5L

Discover the ultimate solution for 3D printing projects with Resin Cleaner. With years of experience we have specially formulated Resin Cleaner to efficiently remove uncured resin. Its low odor, non-flammable composition makes it perfect for use in any setting, including indoors, offices, and laboratories.

69,60 €*

Inhalt: 5 Liter

inkl. MwSt. zzgl. Versandkosten

Sofort verfügbar, Lieferzeit: 1-2 Tage

Inhalt

10L

20L

At 3D-basics, our extensive experience with solvents, coupled with our daily engagement with resin, has provided us with deep insights into the challenges of removing uncured resin. Driven by the desire to overcome these challenges, we embarked on a journey to create an unparalleled Resin Cleaner. Through numerous iterations and rigorous testing, we have meticulously crafted a formula that achieves the ideal balance of efficacy, safety, and user comfort.

Years of experience with Solvents lead to this exceptional Resin Cleaner

Our Resin Cleaner is distinguished by its powerful cleaning capabilities, minimal odor, non-flammable properties, and its suitability for indoor environments, including offices and laboratories. This dedication to innovation and quality ensures that our Resin Cleaner stands out as a superior choice for professionals seeking efficient, safe, and reliable resin removal solutions.

Safe use indoors, offices, and Laboratories

Resin Cleaner is not classified by the EU Regulation 1272/2008 (CLP) therefor no special requirements are necessary to store or handle Resin Cleaner. This makes it ideal for work in office spaces, Laboratories, and indoors.

The cost effective way to post process Resin 3D-Prints

Resin Cleaner can dissolve four to five times the amount of Resin that Isopropanol is capable of dissolving. This makes it very cost effective over time.

Cost Comparison Resin Cleaner vs. Isopropyl Alcohol

	Resin Cleaner	Isopropyl Alcohol
Price/L	13,98€	9,99€
Effectiveness	Lasts 5x as long as IPA	1x
Effective Price per L	2,396€	9,99€

How to use Resin Cleaner

Always wear Nitrile Gloves when handling Resin Cleaner.
Resin Cleaner is not currently certified for use with biocompatible resins.

For removing uncured Resin from SLA or DLP printed parts fill your cleaning container with the amount specified by the manufacturer. To minimize waste, it is suggested to pre-clean the parts before placing them in the cleaning container to expand the lifespan of your fresh Resin Cleaner. Place the finished print in the cleaning container and clean the parts for at least 5 min or according to the material manufacturers guidelines. After the cleaning cycle, wash the Resin Cleaner coated part with water or Isopropanol, let the model dry and check for a tacky surface, repeat if necessary, till the surface is not tacky anymore. If it is still tacky it might be a sign to replace the Resin Cleaner.

Advantages of Resin Cleaner

Resin Cleaner is able to dissolve up to 5 times as much resin as IPA
The evaporation rate of Resin Cleaner is much slower making it easy to store without loosing much of the product
Almost Odorless to a slight chemical smell makes working with Resin Cleaner easier on the people in contact
Not Labeled as a dangerous good with no special requirements regarding storage, ventilation or flame hazard makes Resin Cleaner the perfect indoor, office, Laboratory Solvent

Compatibility

Compatible

Formlabs Wash & Wash L
Prozen Wash & Cure
Anycubic Wash & Cure
Ultrasonic Cleaner

Not Compatible

Biocompatible Resin - Use Isopropanol
Polyurethane Resin - Use PGDA Wash Solvent

How to store Resin Cleaner

There are no special requirements regarding the storage of Resin Cleaner. In General store cool and dry away from sunlight.

Disposal of Resin Cleaner

Resin Cleaner and container as well as rinsing water need to be disposed of at an appropriate waste treatment site. Please check local regulations.

Kennzeichnung gemäß Verordnung Nr. 1272/2008 (CLP)

Dieses Produkt ist nicht als gefährlich eingestuft.

Allgemeine Vorsichtsmaßnahmen: Außer Reichweite von Kindern aufbewahren. Einatmen von Nebel/Dämpfen vermeiden. FALLS IN DEN AUGEN: Einige Minuten lang vorsichtig mit Wasser spülen. Entfernen Sie Kontaktlinsen, falls vorhanden und einfach. Spülen Sie weiter. An einem gut belüfteten Ort lagern. Behälter fest verschlossen halten. Inhalt/Behälter gemäß den lokalen Vorschriften entsorgen.