Skip to main content

General Print Settings for Value Resin | RAL 7001 Silver Grey - 1kg

These settings where optained on a Elegoo Saturn 3 Ultra and serve as a starting point for a successful print. For individual adjustments for major 3D-Printer see the guide below.

Available shortly
Burn in Layers 50µm 100µm
Number of Burn in Layer 35 45
Normal Layers 50µm 100µm
Exposure Time 3.5s 4.0s
Global Settings
Lift Distance 8mm
Lift Speed 120s
Retract Speed 120mm/s
Wait before Print 5s

Value Resin is a budget-friendly choice that brings both quality and convenience to your 3D printing experience. Available in an array of pre-colored options, it enables users to achieve bright, vivid prints without the need for additional coloring or post-processing.

MADE IN AUSTRIA

Value Resin is developed and produced in Austria under strict quality standards. Using only premium raw materials, each batch undergoes a meticulous production process to ensure consistent performance and high-quality results for every print.

Why Choose Value Resin

Value Resin is perfect for those looking to save on costs without sacrificing print quality. Its pre-colored formulation makes it easy to produce vibrant results right out of the printer, reducing the need for added coloring steps and offering an efficient, ready-to-print solution.

Ideal Applications for Value Resin

Value Resin’s affordability and color variety make it an excellent choice for models, prototypes, and any project where budget and color versatility are priorities. It's ideal for hobbyists, educators, and anyone looking to streamline the print process with minimal post-processing.

Key Features of Value Resin

  • Cost-effective: A budget-friendly resin that maintains quality
  • Pre-colored options: Available in a wide range of vibrant colors
  • Easy to print: Formulated for reliable and straightforward printing
  • Minimal post-processing: Ready-to-use colors save time and effort

How to use Value Resin

Always wear Nitrile Gloves when handling Resin.

  1. Shake the bottle very well before use to ensure consistent results.
  2. Pour the resin into the Resin tank and start your print.
  3. After printing, pour the remaining resin back into the bottle using a Resin Filter to keep it in prestine condition.
  4. Rinse your model with Resin Cleaner or Isopropyl alcohol 99,9%
  5. Store the bottle in a cool, dry place away from direct sunlight.

Compatibility of Value Resin

Compatible with DLP and LCD 3D printers with a light source ranging from 395nm to 405nm, including models from Elegoo, Anycubic, Phrozen, Creality, and more.

Value Resin is not tested with SLA 3D printers. Results may vary

Alternatives to Value Resin

How to Store Value Resin

Store in a cool, dry place away from sunlight to maintain its peak condition. Minimize exposure to air and light, and always filter the resin before returning it to the bottle.

Disposal of Value Resin

Dispose of contents/container at a hazardous or special waste collection point. Fully cured resin can be disposed of in a waste stream appropriate for plastics. Treat solvents from cleaning according to local regulations.

Labeling according to Regulation Nr. 1272/2008 (CLP)
Signal Word: Warning
UN Number: 3082
UFI: NVDS-N1QM-700X-JVRQ
GHS07 GHS09
Hazard Statements
  • H315 - Causes skin irritation
  • H317 - May cause an allergic skin reaction
  • H319 - Causes serious eye irritation
  • H410 - Very toxic to aquatic life with long lasting effects
  • If medical advice is needed, have product container or label at hand; Keep out of reach of children; Read carefully and follow all instructions; Avoid breathing mist/vapours; Wear protective gloves/protective clothing/eye protection/face protection; If on skin: wash with plenty of water; If skin irritation or rash occurs: get medical advice/attention; Dispose of contents/container in accordance with local/regional/national/international regulations
  • Contains epoxy constituents. may produce an allergic reaction
  • 4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane, esters with acrylic acid; hexamethylene diacrylate; phenyl bis(2,4,6-trimethylbenzoyl)-phosphine oxide; 2-hydroxyethyl methacrylate; 4,4'-Isopropylodenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane; Reaction products of hexane-1,6-diol with 2-(chloromethyl)oxirane (1:2)
Europa
Technical Data
Density: 1,1 g/cm³ (25°C)
VOC Content: 99,97 %
Supplemental information
Tariff Code: 2916 1400
Country of Origin: Austria
Product weight: 1 kg
Shelf Life (Months): 12
Packaging Dimensions: 90 x 90 x 240 mm
Shipping Restrictions: Limited Quantity
SKU: 33107011
EAN Code: 9120078083796

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.