COLOR AMPULE - Yellow 1 - 25g

€4.92*

Content: 25 (€19.68* / 100 Gramm)

Available, delivery time 2-4 days

Content
Color
Bottle
Productnr.: 33021011
Product information "COLOR AMPULE - Yellow 1 - 25g"

Description


COLOR AMPULE is a dye for BASIC RESIN to color it in a wide variety of colors. COLOR AMPULE is availabe in 12,5g for 500g of Resin and 25g for 1kg Resin. The system is designed to only mix one COLOR AMPULE into one appropriate Resin. If more than 12.5g Dye for 500g Resin or more than 25g Dye for 1kg is mixed into the results of the print might deteriorate.

Application

for coloring Resin

  1. Shake the COLOR AMPULE well for 15 seconds
  2. Pour the whole content into the Resin
  3. securly close the resin bottle and shake for 20-30 seconds
  4. Let the resin rest to reove airbubbles that build up during the shaking

Hazard and Precautionary Statements

  • Signal word Warning

Hazard statements

  • H317 May cause an alergic reaction.

Precautionary statements

  • P280 Wear protective gloves/eye protection.
  • P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
  • P501 Dispose of contents/container in accordance with national regulations.

Download the Material Safety Data Sheet

Disposal of COLOR AMPULE

COLOR AMPULE must be disposed of as special waste (paints and varnishes) at the local waste collection point.

0 of 0 reviews

Write a review

Share your experiences with other customers.


Usefull Accessories

Basic Resin 1kg
Content: 1kg
RESIN BASIC is not really that basic. Developed and manufactured in Austria the material shows excellent properties. It is easy to print and delivers pixel perfect results. Even the smallest details show up with a smooth surface finish. Application for Printing with a DLP or LCD 3D Printer Follow the guidelines of the 3D printer manufacturer to set up the 3D print. The necessary exposure varies for every printer model. Recommended setup: Normal Layers 0,025-0,15mm 10-15 sec. expsoure (RGB) 2,5-5 sec. (Monochrom) per Layer , 3-5 Bottom Layers (about 40-60 sec.) per layer Postprocessing Drain the model over the resin tank Remove the model from the platform Wash off the left over resin from the model with ISOPROPANOL, TPM or RESIN CLEANER Remove the support structure Post-cure the model for mix. 10 minutes under UV light Hazard and Precautionary Statements Signal word Warning Hazard statements H317 - May cause an allergic skin reaction. H413 - May cause long lasting harmful effects to aquatic life. Precautionary statements P101 - If medical advice is needed, have product container or label at hand. P102 - Keep out of reach of children. P273 - Avoid release to the environment. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 - IF ON SKIN: Wash with plenty of water. P333+P313 - If skin irritation or rash occurs: Get medical advice/attention. P501 - Dispose of contents/container in accordance with local/regional/national/international regulations. Download the Material Safety Data Sheet Technical Data Density: 1,18g/cm3 (20°C) Tensile Et: 3730MPa Tensile strength at yield sM: 74,4MPa Chemical Type RESIN Download the Technical Data Sheet Disposal of BASIC RESIN BASIC RESIN must be disposed of as special waste (paints and varnishes) at the local waste collection point.

Variants from €20.75*
€29.08*
Buy with Apple Pay
RESIN FILTER 10x
Content: 10
Resin filter are paper funnel with integrated 125μm mesh to filter cured particles from resin. Application for removing cured resin particle Wear gloves when handling resin. If available, place Resin bottle on a silicone mat and use a PP funnel to stable the filter. Pour the resin slowly from the resin tank of the 3D printer through the filter into the bottle. Resin should be filtered as a general maintainance, especially after a failed print to remove loose particles. Disposal To dispose of used resin filter  Let the resin cure under UV light. Dispose of fully cured resin filter is possible through household waste. Packaging Content 1x Box with 10 Resin filter

€4.92*
Buy with Apple Pay
16x Isopropanol 99,9% 1L
Isopropanol is a highly volatile, flammable, colourless, clear liquid that is used to remove and dissolve uncured resin from SLA and DLP 3D printed parts. It is used in FDM 3D printing for cleaning components, build plates and smoothing certain materials. Because of its rapid evaporation, it dries quickly. Therefore, the container should not be left open any longer than necessary. Application Always wear gloves when handling IPA For removing uncured Resin from SLA or DLP printed parts fill your cleaning vessel with the amount specified by the manufacturer. To minimize waste it´s suggested to pre-clean the parts before placing them in the cleaning vessel to expand the lifespan of your fresh IPA. This can be done in a separate container with either “dirty" IPA from previous cleaning cycles or low evaporation cleaners such as DPM, TPM or PGDA. Place the finished print in the cleaning vessel and clean the parts for at least 5 min. or according to the material manufacturers guidelines. After the cleaning cycle, let the model dry and check for a tacky surface, repeat if necessary till the surface is not tacky anymore. If it´s still tacky replace the IPA. To clean build plates of FDM printers it can be diluted with distilled water in a ratio of 70% isopropanol and 30% water. For smoothing FDM 3D prints Follow the instructions of the smoothing device manufacturer. Advantages of Isopropanol Effective solution to remove uncured resin Quick evaporation speeds up drying process Recommended as final solvent step for cleaning cycles Prefered for Dental and Biocompatible Resins Compatability Compatible Most Resin prints - always check with manufacturer guidelines Not Compatible Formlabs PU Ridged Materials - use PGDA Disposal of Isopropanol Dispose of contents/container to hazardous or special waste collection point. Labeling according to Regulation (EG) Nr. 1272/2008 (CLP) Signal word: Warning Hazard statements H225 - Highly flammable liquid and vapour. H319 - Causes serious eye irritation. H336 - May cause drowsiness or dizziness. Precautionary statements P102 - Keep out of reach of children. P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P261 - Avoid breathing dust/fume/gas/mist/vapours/spray. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P403+P233 - Store in a well-ventilated place. Keep container tightly closed. P501 - Dispose of contents/container in accordance with local/regional/national/international regulations. Download Safety Data Sheets Technical Data Chemical Purity   >99% Chemical Name   2-Propanol CAS Number   67-63-0 Gravity   0,786g/cm³ (25°C) Origin   Austria Download the Technical Data Sheet

Content: 16 Liter (€5.21* / 1 Liter)

€83.33*
Buy with Apple Pay
Single Use Nitrile Gloves 100 pcs Size L
Packaging Units: 1 | Size: L
Disposable nitrile gloves are free of allergy-causing proteins and are therefore a skin-friendly alternative to latex gloves. Nitrile gloves are resistant to many chemicals and oils, are tear-resistant, convince with their high elasticity and convey a good sense of touch. They are ideal for use in medicine, nursing and home care. Nitrile gloves are food safe, which makes them the first choice in the food industry & food processing. Test parameters Test criteria Test level AQL Dimensions S-2 4.0 Physical properties S-2 4.0 1000ml water tightness test G-1 1.5 Visual inspection for minor defects G-1 4.0 Technical data Material: nitrile Color: Black Length 240mm, width: 105 +/- 5mm Standards: food safe, CE, EN 374, EN 455, T. 1-4 Disposal of disposable gloves Depending on the product used, gloves must be disposed of accordingly.

€14.16*
Buy with Apple Pay